|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
ECL ProTM Micrel, Inc. 5V/3.3V HIGH-SPEED DIFFERENTIAL RECEIVER SY10EP16V ECL ProTM SY10EP16V FEATURES Faster version of the SY10EL16V Guaranteed AC performance over temperature and supply voltage: - DC to 3GHz clock throughput - <180ps tr/ft time Internal 75k input pulldown resistor Improved output waveform characteristics 10K ECL compatible I/O Available in small 8-pin (3mm) MSOP and SOIC packages ECL ProTM DESCRIPTION The SY10EP16V is a high-speed differential receiver. The device is functionally equivalent to the EL16V devices, with higher performance capabilities. With output transition times significantly faster than the EL16V, the SY10EP16V is ideally suited for interfacing with highfrequency sources. The SY10EP16V provides a V BB output for either single-ended use or as a DC bias for AC coupling to the device. The VBB pin should be used only as a bias for the SY10EP16V as its current sink/source capability is limited. Whenever used, the VBB pin should be bypassed to the most positive supply voltage (VCC for LVPECL) applications) via a 0.01F capacitor. Under open input conditions (pulled to VEE), internal input clamps will force the Q output LOW. All support documentation can be found on Micrel's web site at www.micrel.com. PIN NAMES Pin D, /D Q, /Q VBB VCC VEE Function ECL Data Inputs ECL Data Outputs Reference Voltage Output Positive Power Supply Negative Power Supply ECL Pro is a trademark of Micrel, Inc. M9999-112805 hbwhelp@micrel.com or (408) 955-1690 1 Rev.: D Amendment: /0 Issue Date: November 2005 Micrel, Inc. ECL ProTM SY10EP16V PACKAGE/ORDERING INFORMATION Ordering Information(1) NC 1 D2 /D 3 VBB 4 8 VCC 7Q 6 /Q 5 VEE Part Number SY10EP16VZC SY10EP16VZCTR(2) SY10EP16VKC SY10EP16VKCTR(2) SY10EP16VZI SY10EP16VZITR(2) SY10EP16VKI SY10EP16VKITR(2, 3) SY10EP16VZG(3) SY10EP16VZGTR(2, 3) SY10EP16VKG(3) SY10EP16VKGTR(2, 3) Package Type Z8-1 Z8-1 K8-1 K8-1 Z8-1 Z8-1 K8-1 K8-1 Z8-1 Z8-1 K8-1 K8-1 Operating Range Commercial Commercial Commercial Commercial Industrial Industrial Industrial Industrial Industrial Industrial Industrial Industrial Package Marking HEP16 HEP16 HP16 HP16 HEP16 HEP16 HP16 HP16 HEP16 with Pb-Free bar-line indicator HEP16 with Pb-Free bar-line indicator HP16 with Pb-Free bar-line indicator HP16 with Pb-Free bar-line indicator Lead Finish Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Pb-Free NiPdAu Pb-Free NiPdAu Pb-Free NiPdAu Pb-Free NiPdAu Available in 8-Pin SOIC and MSOP Packages Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-112805 hbwhelp@micrel.com or (408) 955-1690 2 Micrel, Inc. ECL ProTM SY10EP16V ABSOLUTE MAXIMUM RATINGS(1) Symbol VEE VCC VIN IOUT IBB TLEAD TA Tstore Note : 1. Permanent device damage may occur if absolute maximum ratings are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to absolute maximum ratlng conditions for extended periods may affect device reliability. Rating Power Supply Voltage (VCC = 0) Power Supply Voltage (VEE = 0) Input Voltage (VCC = 0V, VIN not more negative than VEE) Input Voltage (VEE = 0V, VIN not more negative than VCC) Output Current VBB Sink/Source Current(2) Lead Temperature (soldering, 20sec.) Operating Temperature Range Storage Temperature Range -Continuous -Surge Value -6.0 to 0 +6.0 to 0 -6.0 to 0 +6.0 to 0 50 100 0.5 +260 -40 to +85 -65 to +150 Unit Vdc Vdc Vdc Vdc mA mA C C C DC ELECTRICAL CHARACTERISTICS(1) VCC = 0V; VEE = -5.5V to -3.0V; VCC = 3.0V to 5.5V, VEE = 0V(5) TA = -40C Symbol IEE VOH VOL VIH VIL VBB VIHCMR IIH IIL Notes: 1. 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained. 2. VCC = 0V, VEE = VEE(min.) to VEE(max.), all other pins floating. 3. All loading with 50 to VCC - 2.0V. 4. VIHCMR(min.) varies 1:1 with VEE, Max. varies 1:1 with VCC. 5. Input and output parameters vary 1:1 with VCC. TA = +25C Min. -- Typ. -- -- -- -- -- -- -- -- -- Max. 42 TA = +85C Min. -- Max. 42 Unit mA mV mV mV mV mV V A A Parameter Power Supply Current(2) Output HIGH Voltage(3) Voltage(3) Min. -- Max. 42 VCC -1080 VCC -0890 VCC -0980 VCC -1950 VCC -1650 VCC -1950 VCC -1230 VCC -0890 VCC -1130 VCC -1950 VCC -1500 VCC -1950 VCC -1430 VCC -1300 VCC -1350 VEE +2.0 -- 0.5 VCC -0.4 150 -- VEE +2.0 -- 0.5 VCC -0810 VCC -0910 VCC -0720 VCC -1630 VCC -1950 VCC -1595 VCC -0810 VCC -1060 VCC -0720 VCC -1480 VCC -1950 VCC -1445 VCC -1250 VCC -1310 VCC -1190 VCC -0.4 150 -- VEE +2.0 -- 0.5 VCC -0.4 150 -- Outuput LOW Input HIGH Voltage Input LOW Voltage Output Reference Voltage Input HIGH Voltage Common Mode Range(4) Input HIGH Current Input LOW Current M9999-112805 hbwhelp@micrel.com or (408) 955-1690 3 Micrel, Inc. ECL ProTM SY10EP16V AC ELECTRICAL CHARACTERISTICS VCC = 0V; VEE = -5.5V to -3.0V; VCC = 3.0V to 5.5V, VEE = 0V TA = -40C Symbol fMAX tPLH tPHL tSKEW tr tf Notes: 1. fMAX guaranteed for functionality only. VOL and VOH levels are guaranteed at DC only. 2. VIN = 800mV. TA = +25C Min. -- 150 -- 60 Typ. 3 200 5.0 110 Max. -- 250 20 180 TA = +85C Min. -- 200 -- 70 Max. -- 300 20 180 Unit GHz ps ps ps Parameter Maximum Toggle Frequency(1) Propagation Delay to Output Differential(2) Device Skew Output Rise/Fall Times (20% to 80%) Q D Q, /Q Min. -- 100 -- 60 Max. -- 300 -- 180 M9999-112805 hbwhelp@micrel.com or (408) 955-1690 4 Micrel, Inc. ECL ProTM SY10EP16V 8-PIN MSOP (K8-1) Rev. 01 M9999-112805 hbwhelp@micrel.com or (408) 955-1690 5 Micrel, Inc. ECL ProTM SY10EP16V 8-PIN PLASTIC SOIC (Z8-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. (c) 2005 Micrel, Incorporated. M9999-112805 hbwhelp@micrel.com or (408) 955-1690 6 |
Price & Availability of SY10EP16VZITR |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |